CR-31 ELECTRONIC PEDICURE FOOT FILE

Having soft and beautiful feet has never been any easier, with Steam +Care CR-31 Electronic Pedicure Foot File, you will achieve the soft and smooth result instantly and effortlessly. This device is easy to use and gentle on your feet and works fabulously on the hard skin and calluses of your feet. Equipped with a powerful motor inside, the CR-31 Electronic Foot file will buff away hard skin in minutes, leaving you with smooth and soft feet. Furthermore, the SteamCare CR-31 Electronic Pedicure Foot File is rated IPX-4 for water splash resistance and can be used in the shower or rinsed clean with water.

Features

• • Roller Head replaceable. One spare roller head included.

• • Rechargeable. Save on battery cost.

• • IPX-4 water splash resistant. Use in shower or rinse clean with water.

• • Gentle on your feet.

• • Effortlessly Remove the hard skin of your feet in minutes.

Highlights

Package Content

1 unit CR-31 Electronic Pedicure Foot File device.
1 unit A/C Adaptor (for charging).
1 unit Cleaning Brush.
1 unit Spare Roller Head.

How to Use

(1) Before initial use, please charge for 8 hours. During charging, the red indicator light should illuminate.

(2) Remove the protective roller cover before use. Make sure the roller head is securely mounted.

(3) Slide the switch upwards and the roller head should start rolling.

(4) Gently glide the turning roller head over hard skin areas such as heels. The dead skin shall begin to exfoliate. Do not press the roller head too hard against the skin. The device works best when the feet are dry.

(5) Stop occasionally to check if you have achieved the smoothness you desire. Repeat if necessary.

(6) To turn OFF the device, simply slide the switch downwards.

Tips and Device Care

(1) To clean the device, please use the cleaning brush to clear away the dead skin cells in the gaps and rinse it with tap water.

(2) Please do not submerge the entire device into the water.

(3) The included A/C charging adapter is rated 110V for use in the U.S. only.

(4) To replace the roller head, press and hold the white release button on the side of the roller head and pull the roller stone upwards.